Steering Support - Heavier steering
1. Select control module 44 (Steering Assist - or something like this on the OBD11 list)
2. Select Security > enter 28183, or 44595 (these are my new codes -the old code 19249 won't work on this tweak)
3. Select Adaptation
4. Find Support Power - the default setting for this adaptation channel is 100% (or 1)
5. Change to 80% - the lower the setting the "heavier" the steering wheel becomes
Notes :
It will reset after a power cycle.
Sometimes Lane Assist doesn't work while Support Power isn't 100%.
No Comments